Chief Manufacturing Centris FHP-110 User Manual download pdf (Page 4)

Installation Instructions FHP

INSPECT THE UNIT BEFORE INSTALLING

WARNING: Watch for pinch points. Do not put your fingers

between movable parts.

1. Carefully inspect the FHP for shipping damage. If any damage

is apparent, call your carrier claims agent and do not continue

with the installation until the carrier has reviewed the damage.

NOTE: Read all instructions before starting installation.

2. Lay out components to ensure you have all the required parts

before proceeding (see FHP drawing on page 2).

FHP INSTALLATION

WARNING: It is the responsibility of the installer to verify that

the surface to which the FHP is anchored will

safety support the combined load of all attached

components and equipment.

Install the FHP as follows:

1. Determine the exact mounting location prior to installation,

considering the unit’s swing radius.

WARNING: Improper installation can result in serious per-

sonal injury! Make sure that the structural mem-

bers can support a redundant weight factor five

times the total weight of the equipment: if not,

reinforce the structure before installing the FWP.

2. Secure the ceiling plate at the desired location.

3. Thread the outer column with pipe adapter securely into the

ceiling plate (see Figure 1).

4. Using the set screw, secure the outer column in the ceiling

plate.

5. Install the inner column into outer column at desired height and

secure using socket head cap screw, Nylon washer, and lock

nut (see Figure 2).

Figure 1. Outer Column Installation

Figure 2. Mount on Outer Column

1 2 3 4 5 6 7 8

No comments

Chief Manufacturing Centris FHP-110 User Manual Page 4